Skaven Clanrat Painting

Following my post yesterday of my first 15 Clanrats, I thought I would post a few more pictures and some specifics on the process I used.

First, the finished product. 

This is a fairly typical example of  an assembled 4th generation Clanrat model. (See here for my feelings about these older models...). I would say that this is what people would call "Tabletop" quality - so it looks fine on the gaming table but deliberately hasn't had lots of detail or attention that would make it good enough to enter a painting competition. (Of course, I don't know how to do that well enough anyway! haha!)

EDIT: Following the launch of the latest Citadel Paint range in 2012, please note that the colours listed below are from the previous range. I hope to have time to rewrite in the future, but for the time being, you can use the conversion chart/ list I made here or use the official Citadel Conversion chart here.

The  process followed was:

A.) Undercoat and layering:

1. After assembly, liberally apply PVA glue to base and dip in modelling sand.
2. Wait until dry, then undercoat. (I use Chaos Black spraypaint.)
3. Fur: Drybrush Calthan Brown.
4. Skin/ Tail/ Feet: Tallarn Flesh.
5. Cloth: Ice Blue.
6. Metal: Boltgun metal. (Weapons, belt buckle)
7. Leathers: Snakebite leather. (Belt, wristband, armour crosspiece on the back of the Clanrat.)

B.) Apply Washes: Liberally apply Devlan Mud Wash all over.

C.) Reapply base colours: Layered up lighter shades/ colours: 

1. Skin/ Tail/ Feet: Dwarf Flesh on raised areas. (Being careful to leave some Tallarn flesh areas and the shadows created by the Devlan Mud wash and the black undercoat - especially on the tail.)
2. Cloth: Ice Blue on raised areas of cloth.
3. Leathers: Snakebite leather/ Skull white (50/50 mix). 

D.) Final Drybrushing:

1. Fur: Drybrush Calthan Brown/ Skull White (50/50).
2. Metal: Drybrush Mithril silver (Weapon edges) buttons etc. (e.g. Rivets if the model has a shield etc.) or just apply as an "Extreme Highlight" on the edge of the weapon.
3. Base: Drybrush Calthan brown, then drybrush Tallarn Flesh.

E.) Final Basing:

1. Apply dabs of PVA glue onto the base and dip into green flock.
2. Paint base sides Knarloc Green.

Looking at this model now, some final observations and self-criticism would be:

• I need to pay more attention to the feet. I should really do something with the nails/ toes so that they are visible...but I just hate the feet on these models so much I can't motivate myself to do it. (I'll get around to it sometime.)
• I'm still undecided on the Ice Blue colour. As some people have noted, it is just too bright to really be very "Skavenish". On the other hand, if I like it, who cares? I could try toning it down a bit OR go to another colour.
• Skaven weapons that have rust on them look absolutely great. I haven't tried that yet so the weapons on these Clanrats look too well-cared for, and definitely not from the scavenge pile.
• Could I make the flesh areas stand out even more by using a further highlight or drybrushing of Elf flesh? Would it be worth it?
• Applying the modelling sand BEFORE undercoating is fine, but unfortunately it gets on the feet of the model and makes it harder to paint later. I might go back to applying the modelling sand after finishing the paint job.

Only a hundred more models to go and then I'm done!

;-)

Painting a Skaven Jezzail - test...

*Neek, Neek*
While waiting for reinforcements ordered via eBay, I decided to have a go painting some of the models that I bought at my local Games Workshop. One of the units that I really liked the look of was the Skaven Jezzail, a long-rifle unit with good range, excellent ammunition, and an ability to take down tough targets (such as armoured knights etc.)

So, after a few hours, here is what I ended up with:

EDIT: Following the launch of the latest Citadel Paint range in 2012, please note that the colours listed below are from the previous range. I hope to have time to rewrite in the future, but for the time being, you can use the conversion chart/ list I made here or use the official Citadel Conversion chart here.

The picture is a bit dark as it was taken at night rather than in decent natural light, but the process was:
a.) Basecoat Chaos Black.
b.) Fur: Calthan Brown
c.) Skin/ Tail: Tallarn Flesh
d.) Hood: Red Gore
e.) Metal: Boltgun metal
(Jezzail barrel, swords, chain etc.)
f.) Leathers: Snakebite leather.
g.) Jezzail bands: Dwarf bronze.
h.) Wood: Calthan Brown/ Bestial Brown.


After these basic colours were done, I:
1.) Liberally applied Devlan Mud Wash (Fantastic stuff and highly recommended!)
2.) Drybrushed the fur and pavise with a lighter coat of Calthan Brown,
3.) Layered up lighter shades of most of the colours above (but used Blood Red, rather than a lighter shade of Red Gore.)
4.) Drybrushed the sand and flocked the base.

Alternative angles:

I followed a fairly standard red colour scheme based on the one at the Games Workshop website. I'm not sure if I really like this though (I bet everyone uses red, perhaps something in blue?)

Comments and suggestions for improvement welcome!