Monday, July 11, 2011

Conversion for Dual Use Plague Furnace/ Screaming Bell Kit

*Squeek*
Hello my fellow Warlords. This entry in the Chattering Horde is for your beady eyes only - NOT for the man things, as in this entry we will look at a relatively easy way to keep your Screaming Bell kit as "Dual Use".

As you will know, the kit contains parts for both models, but usually, people use it as one or the other. Of course, using parts located on the scavenge pile of the inter-tunnels, you could always scrounge spare parts, but why do that? Especially when even without Warlock Engineer skills or Clan Skryre ingenuity you can achieve the same end? Yes, yes, you see it now!

So how do we achieve this? Arm yourself with a craft-knive, some plastic glue and a bit of patience, and read on!

WARNING: Before anything else, just remember that you are NOT going to glue the Bell or the Plague censer axle between the two stone columns on the platform.

BELL RINGER CONVERSION:

1. Locate the Rat-ogre bell puller.
2. Carefully cut away part of the circle at the end of his chain, in a direction towards the bell puller. This cut should allow you to clip the part onto the end (axle) of the bell.

































3. OPTIONAL: As you aren't going to glue the bell-ringer's chain to the axle of the Screaming Bell (you will just gently clip it on and unclip it) you may find that you may need to add a bit of weight to the bottom of the bell-ringer's platform. This is because otherwise the weight of the bell can pull the platform up in the air. I used a couple of spare bits from some Tau XV Broadside models, but I'm guessing that a couple of coins in the right place would do the trick. Image below:

















4. Clip the chain onto the axle of the bell to use!

















To convert the Plague Censer, there are two steps. The first is to convert the axle on the plague censer, the second is to convert the chain pulled by the Plague monk team that mans the equipment. See below some photos and more information.

 PLAGUE CENSER AXLE CONVERSION:
1. You are going to make an extension of the Plague censer axle. Take 4 parts of sprue.

2. You are going to cut two equal lengths and glue these to the Plague censer axle. They will need to be a few centimeters long and at one end be joined so that the Plague Censer swinging team can clip their chain to it (see below). You will see in the picture below that I have scored the sprue parts and added some chips. Once painted this will help these parts look more like lengths of wood.

















































PLAGUE MONK TEAM CONVERSION:
There are two parts to this. The first is to work on the chain. The second is to make a new platform for the Plague Monks (because the platform supplied with the kit is being used by the Rat Ogre bell ringer!)

1. As with the Rat Ogre conversion (above) we need to make sure we can easily clip the chain of the plague monk team on and off the new axle that we added above.
2. Carefully cut open the circle at the end of the chain that the Plague Monk crew are holding. The picture below will give you an idea of the size and angle of the cuts to make.






















3. Using the platform that is supplied with the kit as a model in terms of size, cut a new platform for the Plague Monk crew from plasticard or any other fairly thin board/ card. You will then need to glue the monks to their new platform. Using a craftknife, score the surface of the platform so that when painted it will feel more like wood than smooth plastic. (The image below isn't ideal, but should give you an idea of this!)

















You're done! Now you can exchange the Screaming Bell and Plague censer depending on your battle needs! The images below should help you see how the final pieces all go together. A few words of caution - treat these conversions with care and be careful when substituting the different parts. (The chains in particular are fragile).

































Hope this is useful - go forth and be victorious!
*Squeeeeeek*

Saturday, July 2, 2011

Maelstrom Games Customer Service update.

*Squeek*

It's been a long time since I've been on the Chattering Horde due to work and other commitments, but I thought I should post an update on the problems I had been having with Maelstrom over the fact that they had sent me an incomplete shipment.


In mid-June, a Maelstrom employee, Tim, left a message on the post where I had complained about their poor service, encouraging me to get in touch. 


To cut a long story short I:
...received a full explanation of the reason for the problem.
"I'm sorry that up to now you have a bad experience with customer support from Maelstrom Games. This isn't the experience we want our customers to have. "


...was offered a solution.
"In your case I'd like to offer you an quick solution as it sounds like you really need that base - something I sympathise with,  it isn't an ideal situation and I can only apologise."


...was dealt with in a timely and courteous manner.
"Needless to say that you can be sure that I treat this issue with the up most importance and I will personally make sure that a replacement base is issued."


...was informed of the follow-up action that would take place.
"Needless to say that you can be sure that I treat this issue with the up most importance and I will personally make sure that a replacement base is issued."


All good so far. I have taken up Maelstrom and Tim on their offer, and I hope that I will be able to report to you soon that all is well once the item I ordered is in my cold, clammy paws.


Thanks to Tim for making the effort to get in touch, and also for trying to resolve the issue. All I need now is to receive the item I ordered and all will be well! (Ironically, the item I asked for was also out of stock, but I hope that it won't take too long...)


When I get the item, I'll post another update.


In the meantime...


*Squeek*

Saturday, June 4, 2011

Skaven - Slayer Sword Winning Diorama at Games Day France.

*Squeek*
Sniff, sniff, a tear comes to my beady (jaundiced) eye to see this. This amazing diorama took home a prize at Games Day France...

From www.games-workshop.com
From www.games-workshop.com
 


































 As the blog says at GW, there is just so much detail to admire in this piece. I love the added parts on the Screaming Bell and the fact that there is someone (or something) in the sewer to the right? (Can't see clearly because of the angle of the photo.)

To see this diorama and other really cool models from the France Games Day scurry (or slink, depending on your clan) over to the Games Workshop blog to see this diorama in more detail. The link is here.

Congratulations to Remy Tremblay! 

*Squeek*

Sunday, May 29, 2011

Maelstrom Games - Please fix your customer service.

*Squeek*

An unusual post this, and not one that I write lightly.

Many of you will know Maelstrom Games. A fine company that was recommended to me, from whom I have purchased several items, and whom I have recommended to others on account of their good prices and the excellent service they provide. (Although sadly, thanks to a new misguided policy from Games Workshop I am unable to buy any GW models from them from now on.)

Longtime readers of this blog may remember that I am a fan of Maelstrom's Bane Lords/ Bane Legions range. In a post dated December 19th, 2010, I took a look over some of the amazing new models that Maelstrom Games was putting out in their Bane Beasts range, including the incredibly cool Scar-Scath, Fiend of Vermin. I was very positive both about how good the range looked and the painting. Subsequently I was thrilled to receive comments on that blog from Ben Komets, who painted some of the models in the range, and also Rob Lane from Maelstrom Games.

In February, I placed my order online for Scar-Skath and duly received the model.


 For some months since, I have been in touch with customer service at Maelstrom Games as I am unhappy with the item I received. Why? Well, after receiving the model, I noticed that it didn't contain a base.

"Didn't contain a base? Surely a trivial thing?" you may say.

Well, not really. To my mind I paid for an item that included something, and that something wasn't there. The entry for this model on the website contains the following text:

"contents:
this contains
1x Scar-scath, Fiend of Vermin 1x Head
1x 50x50mm base"

I decided to contact Maelstrom customer service and request the base. Since then I have been in touch with Maelstrom and there have been some 9 emails back and forth on this.
Here's the history.
  • February 13th 2011. I place an order for Scar-Scath with Maelstrom. As usual, excellent online service, a decent discount (Free postage!) and immediate email confirmation.
  • Feb. 15th 2011. Order despatched. Good job Maelstrom - nice and fast!
  • Feb. 28th 2011. Scar-Scath arrives, and is unboxed! (Sense my happiness here.) Due to work I didn't have to time to start on the model. I notice a few days later that there is no base.
  • March 4th. 2011. I write a polite email to Maelstrom, see below. (ME=Squeek, MS= Maelstrom. Note that I have not included the rep's name as this is a public post, but it was included in all correspondence.
-----------
ME: (Mar. 4th 2011)
Dear Maelstom Games,

Hi there.

I received the Scar- Scath model and I am very excited, it looks great. However, although the website says that this model contains a 50mm base no base was in the box upon arrival. Could I ask you to send the base to the address in my order confirmation email below please?

Thank you in advance.

Best regards,
----------
MS:  (Mar. 5th)
Hi, Sorry the website is a little pre-emptive, the bases aren't available yet, sorry about that.
----------
ME: (Mar. 5)
Dear ...,

Thanks for your reply. I appreciate you getting back to me, but I can't tell from your answer when the bases will be available or whether you will send one to me when they come out.

Could you let me know please?

Thank you and best regards,

------------

MS: (Mar. 10)
If you want we can indeed send it on when they come in.

----------
ME: (Mar. 11)
Dear ...,

Thank you very much for your reply - I appreciate it.

I would definitely like you to send it on please. Do you have any idea whether we are talking days? weeks? etc. until the come into stock?

Thank you again for your reply.

Best regards,

-----------

NO reply from MS at this point. A month later I therefore send a reminder email:

----------
ME: (April 14th)
Dear ...,

I hope you are well.

Is there any update on when the base that was missing from the Scar Skath model that I purchased will be in stock or when you would be able to send it to me? It has been over a month since the model arrived.

Thank you very much and best regards,
----------------

MS: (April 19th)
Hi,

We have just started getting them cast by the resin guys, one should be on it's way asap.

--------------

ME: (April 20th)
Dear ...,
Thanks for the info and the update.

Best Regards,
---------------

Having not received anything since that date and after waiting one month, I sent this.

ME. (May 22nd)
Dear Maelstrom Games,

Hi there.

I am still waiting to receive the base for the Scar Scath model that was missing from the box that I was sent in February. One month ago I was told that the base that accompanies Scar-Scath "...should be on it's way asap", but it still hasn't arrived. Since receiving the model in February I have asked several times about this item. (see emails above.)

I am a big fan of your site and your models, but I feel as though I am being given the run around. While it may not seem to be a particularly important issue (the model itself isn't damaged or other parts missing etc.) the model, for which I paid in full, should be shipped as advertised, including a base.

Please confirm the status of this item and when I can receive it.

Thank you for your time and I hope to hear from you soon.

Best regards,
------------------

Sadly, I have received no answer to that email either.

So, I find myself writing this post on my blog. What do I want? Just the missing piece, sent to me.

Let me be clear about a few things.
a.) Mistakes happen all the time. We are human. No problems. The fact that the item as ordered was missing something isn't a big deal...the problem is the subsequent lack of contact and a failure to follow-up/ provide resolution.
b.) I believe I have at all times been polite and been in touch with Maelstrom to seek resolution. A lack of response is not only unprofessional, it is rude.
c.) I paid for something that didn't get sent to me. Why should I go to the additional hassle of finding an alternative base or making me own?

Let me finish by saying again that I don't want any problems for the customer service rep at Maelstrom, I just want the missing piece. There are thousands of satisfied Maelstrom customers out there and I have been one of them. I wish to continue to use Maelstrom (even if I can't buy GW from them) The fact that I am writing this blog post shows that I care about Maelstrom's business.

Scar-Scath sits unpainted on my shelf.

Damn shame about that.

*Squeek*

Saturday, May 7, 2011

Hell Pit Abomination...finished!

*Squeek*

"So, whose in charge today then?"

The last few days here in Japan have been part of the "Golden Week" holiday period, so I had some time to work on the model from start to finish. To be honest, I found doing those big areas of flesh really difficult, and they still don't look right. I put a lot of time into layering the different colours, but they still look kind of flat. More so in the picture than in reality, but still...

I could have done with this guy (thing?) in my last battle, where some serious hand-to-hand combat power would have come in useful.

 Here's the pics!


Rarrrr!
The "engine" of destruction.
The business end.
the other side. A bit difficult to make out but lots of arms and spikey bits.
Detail of stitches.
Bitey bits. You can see the patina on the bronze chestplate here


Detail of pillar.
Warpstone spikes.
Warpstone and warpstone spikes

As usual, from looking at the photos above I can immediately see more stuff to do...
a.) Add some glow on the skin around the warpstone chunks.
b.) Add a "sore flesh" effect around the tattoos/ scars.
c.) Put some gloss varnish on the dripping blood/ gore from the mouth/ arms.
d.) Add some more varied colours to the veins such as blue/ purple. (At the moment they are layered but don't really stand out enough. Certainly not in these photos anyway.)
e.) Drybrush one more lighter shade onto the "Skull". It looks a bit perfect at the moment...

I hope to write up a step-by-step guide at some point, but I still have to do the Plague Furnace/ Screaming Bell write up so it could be a while.

In the meantime all C&C welcome. Thanks for looking!

*Squeek*
Related Posts Plugin for WordPress, Blogger...