Black Templars Chaplain - Update

So I picked up a Black Templars Chaplain with jet pack a few months ago. He was already nicely painted, but I have had it on my mind to see if I couldn't do something additional for a while (when I pick up something already painted from eBay, I don't really feel it is mine until I have painted it - even if only a little bit.)

Tonight, I spent a while with some washes, colours and highlights. The changes are minimal, but he feels as though he is mine now!

Before...

...and after:

It is quite difficult to tell, but it involved:
a.) Grey/ blue edge highlights on the armour.
b.) Washes and highlighting on the cloth.
c.) Washes and Auric Gold highlights on ornaments and Crozius.
d.) Base. Sand, basecoat, wash and drybrushing.
e.) Metallic highlights/ wear on some edges.

Cheers!

Black Templar Dreadnought - Finished!

Here we go - my first finished Dreadnought!

I had a go at chips on the greaves, firstly using the "foam technique" I had used before, and then (for the first time) tried to paint on some chips and shadow. Sadly the latter didn't work at all. Still, have to start somewhere, right?

Here is the way I received the dreadnought, just for comparison:

Cheers!

Black Templars Dreadnought WIP #1

Dreadnought under way!

Base colours.

A wash or two!

Ah, the Dreadnought...

A staple of the 40K universe, I have always felt that despite Dreadnoughts being a relatively minor part of the lore, they somehow have a hold on the reader that goes deeper than the Tactical Space Marine.
Entombed in a womb-like coffin when near death, they embody both the experience of the Space Marine and their fighting prowess. For me though, they have an almost tragic aspect. Proud warriors and mighty heroes laid low by their wounds, they are kept in a kind of undeath. Awakened only to lumber to war, or to provide advice based on their thousands of years of tactical or strategic experience, I imagine this almost to be a living hell for these once dynamic masters of the battlefield...

...but on to the WIP!

Another eBay acquisition, this Dreadnought came undercoated, with some metallic paints applied, a brown layer of paint on the base (and plenty of mould lines.)

I thought a Dreadnought might be a fairly quick win after completing my first Drop Pod, so yesterday I did some work on the basics

a.) Filed down some of the mould lines.
b.) Added base coats.
c.) Added a dark wash.

Here is where we are now (before and after a wash)

Base colours:

With washes:

(Nuln Oil on the body, Agrax Earthshade on the base)

Hopefully, I can get some drybrushing and a bit of highlighting done before the weekend!

Cheers,

Black Templars Drop Pod WIP #2 and Finished

Moved from washes to highlights, so we are done for now. My first ever drop pod is ready for the tabletop I reckon!

Weathering and washes:

I fixed up all the paint spatters that were on the shell of the pod following getting the base coats done, then attacked the main parts of the pod with washes (Badab Black). 

After that, (and spending a while drooling over the really nicely weathered pods you can see all over the net) I got down to the weathering. I decided to stick with the "Packing foam on a stick" approach as I had tried this before (with my Riptide).

You can see the results of the weathering and washed below. These are before highlights were applied.

I stayed mainly to the edges, but also had a go at the large flat surfaces of white too, hoping that this might break them up a bit. 

I wasn't entirely happy with the results, so I found myself hoping that a bit of drybrushing/ streaking would bring the whole pod up to my liking...

...and it did!

Drybrushing:

The drybrushing makes quite a difference on the ramp.

...and on the top edges or the ramps, really adding some wear...

Drybrushing on the main engine also made a lot of difference.

Interior, with restraint emergency release buckle in red.

Interior. Radar display in green in the middle.

Voila! One Black Templars Drop Pod!

:-)

Cheers!

Black Templars Drop Pod WIP #1

Hi all.

With the weekend came a chance to address the growing pile of Black Templars stuff I have acquired recently. After spending ages putting together a large group of Sternguard from the bits I got, I wanted to take a break from them, so instead turned to a Drop Pod.

For Christmas one of the ebay purchases I made was a set of half-finished Tacticals and a Drop Pod. I already have plenty of BT Crusaders, so the purchase was designed to get my first Drop Pod, as I'd like to have the option to create a distraction in my opponent's back field (a Dreadnought or Sternguard?).

Of course, 2 Pods would be better, but I have to start somewhere!

So how is it going? Photos below:

Original state, with (unfinished) Marine for scale

After adding some Grey (to make the white easier)

External doors - grey ready to receive white.

Helbrecht!

As you can see, I have got the base coats done now - they took a LOT longer than I thought. I also added some yellow warning lines, which was a nerve-wracking freehand attempt to add some colour (I didn't have masking tape, so added some lines using pencil as a guide, and then worked to those). 

Now the basecoats are done, I need to think about washes, highlights and weathering. TBH, not really sure how to weather those large white panels effectively (and easily) so all advice is welcome!

Right, off to play some Planetside 2 (which would make for an absolutely amazing WH40K muliplayer game IMHO...)

Cheers,

*Squeek*